A49Y-PW5414V DN100主安全阀  Description:
| 主要零件材料 Main part material | | 主安全阀 Main safety valve | 件号
Part number | 零件名称
Name of parts | 材料
Material | | 1 | 下阀体 Nether Body | 铬钼钒钢CrMoV steel | | 2 | 阀 瓣Disc | 铬钼钒钢CrMoV steel | | 3 | 阀 座Seat | 铬钼钒钢CrMoV steel | | 4 | Upper Body | 铬钼钒钢CrMoV steel | | 5 | 阀 杆Stem | 铬钼钒钢CrMoV steel | | 6 | 活 塞Piston | 不锈钢Stainless steel | | 7 | 阀 盖Bonnet | 铬钼钒钢CrMoV steel | | 重量（kg） Weight | 403 | The impulse safety device is the main safety valve, with auxil-iary valve support contained. This device has characteristics as large discharge ability, convenient adjustment, dual mechanical and electric protection and few workload in installation and maint-enance.
This device is used for inlet and outlet pipe of reheater to avoid mediun pressure exceeding the allowable value to ensure the reheater shall run safely.
1.The impulse safety device is as shown in the figure, mainly consisted of impulse safety valve, the main safety valve, stop valve and throttle valve. Impulse safety valve is a kind of spring safety valve. It is mainly consisted of body , bonnet, disc and other parts.The impulse safety valve can be adjusted by using the spring to regulate the pressure.
The impulse safety valve contains an electromagnet to open and another to close the valve. The actions of the mechanism and the electric appliance are separate and will not affect each other .
2.The main safety valve is as shown in the figure. With astructure of single exhaust and both ends of flange connection, it is mainly consisted of body, bonnet, piston chamber, disc, stem and other parts.
3.Both the sealed surfaces of disc and seat of the impulse safety valve are made of hard alloy of cobalt by overlaying welding Both the seat and the disc of the main safety valve are made of hard alloy of cobalt by plasma spray welding.
4.The upper part of the impulse safety valve contains an elec-tromagnet to open and another to close off. At ordinary times, the close-off electromagnet may not be electrified, but when the sealed surface of the valve leaks or when the mechanical addition adjusting reseating pressure is excessively low, it can be electrified by closing electromagnet to make valve sealed or help the valve clack return and procure a higher seat reseating pressure.
5.The impulse safety valve only leaves the factory after it has passed the seal and sensitivity tests, proved to be qualified.
When the medium pressure inside the reheater exceeding the allowable value, the impulse safety valve opens firstly; the steam enters into the piston chamber of the main safety valve, forcing the main safety valve to open; the reheater bengins discharging steam;after the excess pressure has been released, the impulse safety valve closes, stopping the steam entering into the piston chamber of the main safety valve; the main safety valve automatically colses at the reactions of the spring and medium. 当您与我们取得时，请您提供的详细规格要求，这将有助于我们给您提供一个有效的服务。当您有任何疑问，您可以来电告知我们,我们一定会尽心尽力为您提供优质的服务。
订货须知：（国家标准）
一、A:产品名称、产品型号、公称通径B:运用介质及温度、压力范围C:是否有附件、实验检验标准、交货期、特殊要求等事宜、以便我们的为您正确选型。【闸阀站：http://www.shqzfamen.com】
二、若已经由设计单位选定我公司的型号，请您根据参数直接与我们销售中心订购。【球阀站：http://www.shqzvalve.com】
三、当您使用的场合非常重要或环境比较复杂时,请您尽量提供设计图纸和详细参数，由我们的高级工程师专家会专心为您审核与分析。【调节阀：http://www.shqzfm.com】
我们可以为您提供专业的解决方案，包括设计、定做、成套、运行、服务。上海奇众阀门制造有限公司立志成为世界的阀门制造商。我们一直致力于阀门行业领域的*，为您提供的阀门知识、的服务、*的技术顾问。【*站：http://www.shqzv.com】 |
